View MSDS :

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

SECTION 1 - PRODUCT AND COMPANY
IDENTIFICATION

Product Name:

1-Part Epoxy Acrylic Concrete & Garage Floor
Paint Slate Gray No. 902

MSDS Manufacturer Number:

902

Manufacturer Name:

BEHR Process Corporation

Address:

3400 W. Segerstrom Avenue
Santa Ana, CA
92704

General Phone Number:

(714) 545-7101

General Fax Number:

(714) 241-1002

Customer Service Phone Number:

(800) 854-0133 ext. 2

CHEMTREC:

For emergencies in the US, call CHEMTREC: 800-424-9300

Canutec:

In Canada, call CANUTEC: (613) 996-6666 (call collect)

MSDS Creation Date:

06/26/2006

MSDS Revision Date:

03/09/2008

NFPA

1
1
0

HMIS

Health
Hazard

1

Fire Hazard

1

REACTIVITY

0

Personal Protection

* Chronic Health
Effects:

SECTION 2 - COMPOSITION/INFORMATION
ON INGREDIENTS

Chemical Name

CAS#

Ingredient Percent

Non hazardous ingredients

No data

30 - 60 by weight

Undisclosed/Proprietary

No data

1 - 5 by weight

Styrene acrylic polymers

No data

10 - 30 by weight

Nepheline Syenite

37244-96-5

5 - 10 by weight

Hydrated aluminum-magnesium silicate

12174-11-7

0.1 - 1 by weight

Ethylene glycol

107-21-1

1 - 5 by weight

Dipropylene glycol monomethyl ether

34590-94-8

1 - 5 by weight

Dipropylene glycol butoxy ether

29911-28-2

1 - 5 by weight

Carbon black, amorphous

1333-86-4

0.1 - 1 by weight

Amorphous silica

7631-86-9

0.1 - 1 by weight

Talc, Magnesium silicate hydrate

14807-96-6

0.1 - 1 by weight

Titanium dioxide

13463-67-7

5 - 10 by weight

SECTION 3 - HAZARDS
IDENTIFICATION

Emergency Overview:

Irritant.

Potential Health Effects:

Eye:

May
cause irritation.

Skin:

May
cause irritation.

Inhalation:

Prolonged or excessive inhalation may cause respiratory tract
irritation.

Ingestion:

May
be harmful if swallowed. May cause vomiting.

Chronic Health Effects:

Prolonged or repeated contact may cause skin
irritation.

Signs/Symptoms:

Overexposure may cause headaches and dizziness.

Target Organs:

Eyes. Skin. Respiratory system. Digestive
system.

Aggravation of Pre-Existing Conditions:

None
generally recognized.

SECTION 4 - FIRST AID
MEASURES

Eye Contact:

Immediately flush eyes with plenty of water for 15 to 20
minutes. Get medical attention, if irritation or symptoms of
overexposure persists.

Skin Contact:

Immediately wash skin with soap and plenty of water.
Get
medical attention if irritation develops or persists.

Inhalation:

If
inhaled, remove to fresh air. If not breathing, give artificial
respiration or give oxygen by trained personnel. Seek immediate
medical attention.

Ingestion:

If
swallowed, do NOT induce vomiting. Call a physician or poison
control center immediately. Never give anything by mouth to an
unconscious person.

Other First Aid:

Due
to possible aspiration into the lungs, DO NOT induce vomiting if
ingested. Provide a glass of water to dilute the material in the
stomach. If vomiting occurs naturally, have the person lean forward
to reduce the risk of
aspiration.

SECTION 5 - FIRE FIGHTING
MEASURES

Flash Point:

No
Data

Extinguishing Media:

Use
alcohol foam, carbon dioxide, dry chemical, or water fog or spray
when fighting fires involving this material.

Protective Equipment:

As
in any fire, wear Self-Contained Breathing Apparatus (SCBA),
MSHA/NIOSH (approved or equivalent) and full protective
gear.

NFPA
Ratings:

NFPA Flammability:

1

NFPA Health:

1

NFPA Reactivity:

0

SECTION 6 - ACCIDENTAL RELEASE
MEASURES

Personnel Precautions:

Use
proper personal protective equipment as listed in section
8.

Environmental Precautions:

Avoid runoff into storm sewers, ditches, and
waterways.

Spill Cleanup Measures:

Absorb spill with inert material (e.g., dry sand or earth),
then place in a chemical waste container. Provide ventilation. Clean
up spills immediately observing precautions in the protective
equipment section.

SECTION 7 - HANDLING and
STORAGE

Handling:

Use
with adequate ventilation. Avoid breathing vapor and contact with
eyes, skin and clothing.

Storage:

Store in a cool, dry, well ventilated area away from sources
of heat, combustible materials, and incompatible substances. Keep
container tightly closed when not in use.

Hygiene Practices:

Wash
thoroughly after handling. Avoid contact with eyes and skin. Avoid
inhaling vapor or mist.

SECTION 8 - EXPOSURE CONTROLS,
PERSONAL PROTECTION - EXPOSURE GUIDELINES

Engineering Controls:

Use
appropriate engineering control such as process enclosures, local
exhaust ventilation, or other engineering controls to control
airborne levels below recommended exposure limits. Good general
ventilation should be sufficient to control airborne levels. Where
such systems are not effective wear suitable personal protective
equipment, which performs satisfactorily and meets OSHA or other
recognized standards. Consult with local procedures for selection,
training, inspection and maintenance of the personal protective
equipment.

Eye/Face Protection:

Wear
appropriate protective glasses or splash goggles as described by 29
CFR 1910.133, OSHA eye and face protection regulation, or the
European standard EN 166.

Skin Protection Description:

Chemical-resistant gloves and chemical goggles, face-shield
and synthetic apron or coveralls should be used to prevent contact
with eyes, skin or clothing.

Respiratory Protection:

A
NIOSH approved air-purifying respirator with an organic vapor
cartridge or canister may be permissible under certain circumstances
where airborne concentrations are expected to exceed exposure
limits. Protection provided by air purifying respirators is limited.
Use a positive pressure air supplied respirator if there is any
potential for an uncontrolled release, exposure levels are not
known, or any other circumstances where air purifying respirators
may not provide adequate protection.

Other Protective:

Facilities storing or utilizing this material should be
equipped with an eyewash facility and a safety
shower.

EXPOSURE GUIDELINES

Ethylene glycol
:

Guideline ACGIH:

TLV-STEL: C 100 mg/m3 (Aerosol only)

Dipropylene glycol
monomethyl ether :

Guideline ACGIH:

TLV-TWA: 100 ppm
TLV-STEL: 150 ppm

Guideline OSHA:

OSHA-TWA: 100 ppm
OSHA-STEL: 150 ppm

Carbon black,
amorphous :

Guideline ACGIH:

TLV-TWA: 3.5 mg/m3

Guideline OSHA:

OSHA-TWA: 3.5 mg/m3

Talc, Magnesium
silicate hydrate :

Guideline ACGIH:

TLV-TWA: 2 mg/m3 (Respirable)

Guideline OSHA:

OSHA-TWA: 20 mg/m3

Titanium dioxide
:

Guideline ACGIH:

TLV-TWA: 10 mg/m3

Guideline OSHA:

OSHA-TWA: 15
mg/m3

SECTION 9 - PHYSICAL and CHEMICAL
PROPERTIES

Physical State Appearance:

Liquid.

Color:

gray

Flash Point:

No
Data

Boiling Point:

No
Data

Melting Point:

No
Data

Density:

8 -
10 Lbs./gal.

Vapor Density:

Greater than 1 (Air = 1).

pH:

8.5
to 9.5

Molecular Formula:

Mixture

Molecular Weight:

Mixture

Flash Point:

No
Data

VOC Content:

Material VOC: 97 gm/l (Includes Water)
Coating VOC.: 237
gm/l (Excludes Water)

SECTION 10 - STABILITY and
REACTIVITY

Chemical Stability:

Stable under normal temperatures and pressures.

Hazardous Polymerization:

Not
reported.

Conditions to Avoid:

Heat, flames, incompatible materials, and freezing or
temperatures below 32 deg. F.

Incompatible Materials:

Oxidizing agents. Strong acids and
alkalis.

SECTION 11 - TOXICOLOGICAL
INFORMATION

RTECS Number:

RT6400000

Ethylene glycol
:

RTECS Number:

KW2975000

Eye:

Eye
- Rabbit; Standard Draize Test. : 500 mg/24H; mild.
Eye - Rabbit;
Standard Draize Test. : 1440 mg/6H; Moderate. (RTECS)

Skin:

Skin
- Rabbit; Open irritation : 555 mg; mild. (RTECS)

Inhalation:

Inhalation. - Rat LC: >200 mg/m3/4H; Details of toxic
effects not reported other than lethal dose value.
Inhalation. -
Mouse LC: >200 mg/m3/2H; Details of toxic effects not reported
other than lethal dose value. (RTECS)

Ingestion:

Ingestion - Rat LD50: 4700 mg/kg; Details of toxic effects
not reported other than lethal dose value.. (RTECS)

Dipropylene glycol
monomethyl ether :

RTECS Number:

JM1575000

Eye:

Eye
- Rabbit; Standard Draize Test. : 500 mg/24H; mild.
(RTECS)

Skin:

Skin
- Rabbit; Open irritation : 500 mg; mild. (RTECS)

Ingestion:

Ingestion - Rat LD50: 5400 uL/kg; Details of toxic effects
not reported other than lethal dose value.
Ingestion - Rat LD50:
5.5 ml/kg; Details of toxic effects not reported other than lethal
dose value.. (RTECS)

Dipropylene glycol
butoxy ether :

RTECS Number:

UA8200000

Eye:

Eye
- Rabbit; Standard Draize Test. : 100 mg; No effects reported.
(RTECS)

Skin:

Skin
- Rabbit LD50: 5860 uL/kg; Behavioral - somnolence (general
depressed activity) Gastrointestinal - hypermotility, diarrhea
Lungs, Thorax, or Respiration - other changes (RTECS)

Ingestion:

Ingestion - Rat LD50: 1620 uL/kg; Behavioral - somnolence
(general depressed activity) Behavioral - ataxia Skin and Appendages
- hair (RTECS)

Carbon black,
amorphous :

RTECS Number:

FF5800000

Skin:

Skin
- Rabbit LD50: >3 gm/kg; Details of toxic effects not reported
other than lethal dose value.] (RTECS)

Ingestion:

Ingestion - Rat LD50: >15400 mg/kg; Behavioral -
somnolence (general depressed activity) (RTECS)

Amorphous silica
:

RTECS Number:

EU8655000

Eye:

Eye
- Rabbit; Standard Draize Test. : 25 mg/24H; mild.
(RTECS)

Inhalation:

Inhalation. - Rat LCLo: 2190 mg/m3/4H; Lungs, Thorax, or
Respiration - dyspnea (RTECS)

Ingestion:

Ingestion - Rat LDLo: 5 gm/kg; Nutritional and Gross
Metabolic - other changes (RTECS)

RTECS Number:

WW2710000

Titanium dioxide
:

RTECS Number:

XR2275000

Skin:

Skin
- Rabbit; Standard Draize Test. : 300 ug/3D; (Intermittent) mild.
(RTECS)

Ingestion:

Ingestion - Rat TDLo: 60 gm/kg; Gastrointestinal -
hypermotility, diarrhea Gastrointestinal - other changes.
(RTECS)

SECTION 12 - ECOLOGICAL
INFORMATION

Ecotoxicity:

No
ecotoxicity data was found for the product.

Environmental Fate:

No
environmental information found for this
product.

SECTION 13 - DISPOSAL
CONSIDERATIONS

Waste Disposal:

Consult with the US EPA Guidelines listed in 40 CFR Part
261.3 for the classifications of hazardous waste prior to disposal.
Furthermore, consult with your state and local waste requirements or
guidelines, if applicable, to ensure compliance. Arrange disposal in
accordance to the EPA and/or state and local
guidelines.

SECTION 14 - TRANSPORT
INFORMATION

DOT UN Number:

No
Data

DOT Hazard Class:

No
Data

SECTION 15 - REGULATORY
INFORMATION

Nepheline Syenite
:

TSCA Inventory Status:

Not
listed

Canada DSL:

Listed

Hydrated
aluminum-magnesium silicate :

TSCA Inventory Status:

Not
listed

California PROP 65:

Listed in California Prop65 list

Canada DSL:

Not
listed

Ethylene glycol
:

TSCA Inventory Status:

Listed

State Regulations:

Listed in the New Jersey State Right to Know List.
Listed
in the Pennsylvania State Hazardous Substances List.

Canada DSL:

Listed

Dipropylene glycol
monomethyl ether :

TSCA Inventory Status:

Listed

State Regulations:

Listed in the New Jersey State Right to Know List.
Listed
in the Pennsylvania State Hazardous Substances List.

Canada DSL:

Listed

Dipropylene glycol
butoxy ether :

TSCA Inventory Status:

Listed

Canada DSL:

Listed

Carbon black,
amorphous :

TSCA Inventory Status:

Listed

State Regulations:

Listed in the New Jersey State Right to Know List.
Listed
in the Pennsylvania State Hazardous Substances List.

California PROP 65:

Listed in California Prop65 list

Canada DSL:

Listed

Amorphous silica
:

TSCA Inventory Status:

Listed

State Regulations:

Listed in the Pennsylvania State Hazardous Substances
List.

Canada DSL:

Listed

Talc, Magnesium
silicate hydrate :

TSCA Inventory Status:

Listed

State Regulations:

Listed in the New Jersey State Right to Know List.
Listed
in the Pennsylvania State Hazardous Substances List.

Canada DSL:

Listed

Titanium dioxide
:

TSCA Inventory Status:

Listed

State Regulations:

Listed in the New Jersey State Right to Know List.
Listed
in the Pennsylvania State Hazardous Substances List.

Canada DSL:

Listed

WARNING: This product contains a chemical known to the state
of California to cause cancer and birth defects or other
reproductive harm.

SECTION 16 - ADDITIONAL
INFORMATION

HMIS Fire Hazard:

1

HMIS Health Hazard:

1

HMIS Reactivity:

0

MSDS Creation Date:

06/26/2006

MSDS Revision Date:

03/09/2008

MSDS Revision Notes:

Quarterly formula update

MSDS Author:

Actio Corporation

Disclaimer:

This
Health and Safety Information is correct to the best of our
knowledge and belief at the date of its publication but we cannot
accept liability for any loss, injury or damage which may result
from its use. We shall ensure, so far as is reasonably practicable,
that any revision of this Data Sheet is sent to all customers to
whom we have directly supplied this substance, but must point out
that it is the responsibility of any intermediate supplier to ensure
that such revision is passed to the ultimate user. The information
given in the Data Sheet is designed only as a guidance for safe
handling, storage and the use of the substance. It is not a
specification nor does it guarantee any specific properties. All
chemicals should be handled only by competent personnel, within a
controlled environment. Should further information be required, this
can be obtained through the sales office whose address is at the top
of this data sheet.

Trademark:

The
trademarks, service marks, graphics and logos used on this MSDS are
registered or unregistered trademarks of BEHR Process Corporation.
All Rights Reserved.

Copyright© 1996-2008 Actio Software Corporation. All Rights
Reserved.