WHITTAKER, CLARK & DANIELS INC -- HYDRATED ALUMINA -- 6810-00N071778
===================== Product Identification ===================== Product ID:HYDRATED ALUMINA MSDS Date:01/01/1996 FSC:6810 NIIN:00N071778 === Responsible Party === Company Name:WHITTAKER, CLARK & DANIELS INC Address:100 COOLIDGE ST City:SOUTH PLAINFIELD State:NJ ZIP:07080 Country:US Info Phone Num:908-561-6100 Emergency Phone Num:908-561-6100 CAGE:GO100 === Contractor Identification === Company Name:WHITTAKER CLARK AND DANIELS INC Address:1000 COOLIDGE ST Box:City:SOUTH PLAINFIELD State:NJ ZIP:07080 Country:US Phone:908-561-6100/8007320562 CAGE:87775 Company Name:WHITTAKER, CLARK & DANIELS INC Address:1000 COOLIDGE STREET City:SOUTH PLAINFIELD State:NJ ZIP:07080 Country:US Phone:(908) 561-6100 CAGE:GO100 ============= Composition/Information on Ingredients ============= Ingred Name:ALUMINUM HYDROXIDE CAS:21645-51-2 RTECS #:BD0940000 Fraction by Wt: 64.5-67% OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:LOSS ON IGNITION Fraction by Wt: 34.5% OSHA PEL:N/K ACGIH TLV:N/K ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:EYES: MAY CAUSE MECHANICAL IRRITATION. SKIN: MAY CAUSE SLIGHT IRRITATION. INHALATION: LOW HEALTH RISK BY INHALATION AND SHOULD BE TREATED AS A NUISANCE DUST AS SPECIFIED BY THE ACGIH. THIS PRODUCT CON TAINS TOTAL SILICON AT <1% BY WEIGHT. TOTAL SILICON CONTENT INCLUDES METAL SILICATES, AMORPHOUS AND (EFTS OF OVEREXP) Explanation of Carcinogenicity:NOT RELEVANT Effects of Overexposure:HLTH HAZ: CRYSTALLINE SILICA. NO ANALYTICAL METHOD EXISTS TO DETECT & DIFFERENTIATE BETWEEN AMORPHOUS & CRYSTALLINE SILICA & OTHER SILICATES AT <1% BY WEIGHT. BASED ON THE CHEMISTRY OF BAUXITE DERIVED PRODUCTS, CRYSTALLINE SILICA IS NOT EXPECTED TO BE PRESENT IN THIS PRODUCT. Medical Cond Aggravated by Exposure:ASTHMA, CHRONIC LUNG DISEASE AND SKIN RASHES. ======================= First Aid Measures ======================= First Aid:EYES:FLUSH EYES W/PLENTY OF WATER FOR AT LEAST 15 MIN. CONSULT MD IF IRRITATION PERSISTS. SKIN: WASH W/SOAP & WATER FOR AT LEAST 15 MIN. CONSULT MD IF IRRITATION PERSISTS. INHAL: REMOVE TO FRESH AIR. IF BREATHING IS LABORED OR STOPPED, GIVE ARTIFICIAL RESPIRATION. GET IMMEDIATE MEDICAL ATTENTION. INGEST: IF SWALLOWED, DILUTE W/LARGE AMOUNTS OF WATER. DO NOT INDUCE VOMITING. CONSULT MD IMMEDIATELY. ===================== Fire Fighting Measures ===================== Flash Point:NONE Extinguishing Media:USE EXTINGUISHING AGENT APPLICABLE TO SURROUNDING FIRE. Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER. ================== Accidental Release Measures ================== Spill Release Procedures:SMALL/LARGE SPILL: CLEAN UP USING DRY PROCEDURES; AVOID DUSTING. COLLECT IN CONTAINERS OR BAGS. IF REUSE OR RECYCLING IS NOT POSSIBLE, MATERIAL MAY BE DISPOSED OF AT A SANITARY LANDFILL. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:AVOID DUSTING AND CONTACT WITH EYES AND SKIN. DO NOT INHALE DUST. KEEP MATERIAL DRY. Other Precautions:NONE SPECIFIED BY MANUFACTURER. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NIOSH APPROVED DUST RESPIRATOR IF OVEREXPOSURE POTENTIAL EXISTS. Ventilation:USE WITH ADEQUATE VENTILATION TO MEET LISTED EXPOSURE LIMITS. Protective Gloves:APPROPRIATE IMPERVIOUS GLOVES. Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES . Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER . Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER. Supplemental Safety and Health PH: 8.5 - 10.2 (20% SOLN). ================== Physical/Chemical Properties ================== Melt/Freeze Pt:M.P/F.P Text:3700F,2038C Spec Gravity:2.4 pH:SUPDAT Solubility in Water:INSOLUBLE Appearance and Odor:WHITE OR OFF WHITE CRYSTALLINE POWDER; NO ODOR. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES NONE. Stability Condition to Avoid:WHEN EXPOSED TO FIRE OR HEAT, HYDRATED ALUMINA LOSES ITS WATER OF CRYSTALLIZATION BEGINNING AT 392F(200C). Hazardous Decomposition Products:NONE. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS . COLLECT IN CONTAINERS, BAGS OR COVERED DUMPSTER BOXES. IF REUSE OR RECYCLING IS NOT POSSIBLE, MATERIAL MAY BE DISPOSED OF IN A SANITARY LANDFILL. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.