SPRAYWAY INC -- INK ANTI-SKIN SPRAY  -- 6850-01-036-4953
<pre>=====================  Product Identification  =====================

Product ID:INK ANTI-SKIN SPRAY
MSDS Date:05/26/1995
FSC:6850
NIIN:01-036-4953
Status Code:A
=== Responsible Party ===
Company Name:SPRAYWAY INC
Address:484 VISTA AVE
City:ADDISON
State:IL
ZIP:60101-4421
Country:US
Info Phone Num:708-628-3000
Emergency Phone Num:800-228-5635
Preparer's Name:PHILLIP T. MILLER
CAGE:55772
=== Contractor Identification ===
Company Name:MARTIN DICK PRESS SERVICE
Address:8406 NEW ASHCAKE RD
City:MECHANICSVILLE
State:VA
ZIP:23116-3002
Country:US
Phone:804-746-0702
Contract Num:SPO450-00-M-D-175
CAGE:3S163
Company Name:SPRAYWAY INC
Address:484 VISTA AVE
Box:City:ADDISON
State:IL
ZIP:60101-4421
Country:US
Phone:708-628-3000
CAGE:55772

=============  Composition/Information on Ingredients  =============

Ingred Name:ISOPARAFFINIC HYDROCARBON
CAS:64742-48-9
Code:F
Minumum % Wt:50.
Maxumum % Wt:60.

Ingred Name:BUTYLATED HYDROXY TOLUENE
CAS:128-37-0
RTECS #:GO7875000
Minumum % Wt:3.
Maxumum % Wt:5.
ACGIH TLV:10 MG/M3

Ingred Name:MINERAL OIL
CAS:8042-47-5
Code:F
RTECS #:PY8047000
Minumum % Wt:20.
Maxumum % Wt:25.
ACGIH TLV:5 MG/M3

Ingred Name:METHYL ETHYL KETOXIME
CAS:96-29-7
RTECS #:FL9275000
Minumum % Wt:2.
Maxumum % Wt:5.

Ingred Name:LIQUEFIED PETROLEUM GAS
CAS:68476-85-7
RTECS #:SE7545000
Minumum % Wt:15.
Maxumum % Wt:20.
OSHA PEL:1800 MG/M3;1000 PPM
ACGIH TLV:1800 MG/M3;1000 PPM

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:HIGH VAPOR/AEROSOL CONCENTRATIONS CAN
    BE IRRITATING TO THE EYES AND RESPIRATORY TRACT. MAY CAUSE CENTRAL
    NERVOUS SYSTEM EFFECTS. IRRITATING TO SKIN & EYES. SMALL AMOUNTS
    ASPIRATED INTO THE RESPIRATORY  SYSTEM DURING INGESTION MAY CAUSE
    MILD TO SEVERE PULMONARY INJURY.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:INHALATION: HEADACHES, DIZZINESS, DROWSINESS,
    OTHER CNS EFFECTS. EYES-IRRITATION. SKIN-IRRITATION.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN OR EYE DISORDERS
    MAY BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT.

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH WITH PLENTY OF WATER FOR 15 MINUTES WHILE HOLDING
    EYELIDS OPEN. GET MEDICAL ATTENTION IF IRRITATION PERSISTS.
    SKIN:REMOVE CONTAMINATED CLOTHES. FLUSH SKIN WITH WATER FOLOOWED BY
    WASHING WIT H SOAP 7 WATER. IF IRRITATION OCCURS, GET MEDICAL
    ATTENTION. DO NOT REUSE CLOTHES UNTIL CLEANED. INHALATION: REMOVE
    VICTIM TO FRESH AIR & PROVIDE OXYGEN IF BREATHING IS DIFFICULT. GET
    ARTIFICIAL RESPI RATION IF NOT BREATHING. GET MEDICAL ATTENTION.
    INGESTION: GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Lower Limits:1.8
Upper Limits:9.2
Extinguishing Media:CARBON DIOXIDE, FOAM, AND/OR DRY CHEMICAL MAY BE
    USED.
Fire Fighting Procedures:CONTAINERS SHOULD BE COOLED WITH WATER TO
    PREVENT VAPOR PRESSURE BUILD UP.  USE EQUIPMENT OR SHEILDING, AS
    REQUIRED, TO PROTECT PERSONNEL FROM BURSTING, RUPTURING OR VENTING
    CONTAINERS.
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES (OVER 54C-130F)
    CONTAINERS EXPOSED TO DIRECT FLAME OR HEAT CONTACT SHOULD BE COOLED
    WITH WATER TO PREVENT WEAKENING OF CONTAINER STRUCTURE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION & VENTILATE
    AREA. SOAK UP WITH INERT ABSORBENT & PLACE IN A DESIGNATED DISPOSAL
    CONTAINER. CONSULT LOCAL REGULATORY AGENCY FROR PROPER DISPOSITION
    OF MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID BREATHING VAPOR. KEEP AWAY FROM
    HEAT & FLAME. USE WITH ADEQUATE VENTILATION. DO NOT PUNCTURE  OR
    INCINERATE CONTAINERS. DO NOT EXPOSE TO DIRECT SUNLIGHT OR STORE AT
    TEMPERATURES ABOVE 130F(54C).  STORE AS LEVEL 3 AEROSOL (NFPA 30B).
Other Precautions:PLEASE READ AND FOLLOW THE DIRECTIONS ON THE
    MANUFACTURER'S PRODUCT LABEL. THEY ARE YOUR BEST GUIDE TO USING
    THIS PRODUCT IN THE MOST EFFECTIVE WAY AND GIVE THE NECESSARY
    SAFETY PRECAUTIONS TO PROTECT  YOUR HEALTH.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED IF GOOD VENTILATION IS MAINTAINED.
     IF EXPOSURE EXCEEDS OCCUPATIONAL EXPOSURE LIMITS (SEC.II), USE A
    NIOSH APPROVED RESPIRATOR TO PREVENT OVEREXPOSURE.
Ventilation:LOCAL EXHAUST IS ADEQUATE UNDER NORMAL CONDITIONS,
    MECHANICAL VENTILATION IS OPTIONAL.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL SAFETY GLASSES ARE RECOMMENDED.
Other Protective Equipment:WEAR IMPERVIOUS CLOTHING TO PREVENT SKIN
    CONTACT.
Work Hygienic Practices:ENSURE STRICT SANITARY CONDITIONS ARE CONFORMED
    TO WHEN WORKING AROUND CHEMICALS.
Supplemental Safety and Health
PROTECTIVE CLOTHING AND EQUIPMENT SHOULD BE IN ACCORDANCE WITH 29 CFR
    1910.132 AND CFR 1910.33.

==================  Physical/Chemical Properties  ==================

HCC:V3
Vapor Pres:65-70@130F (PSIG)
Vapor Density:>1
Spec Gravity:<1.0
Evaporation Rate &amp; Reference:<1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR/HYDROCARBON ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT STORE ABOVE 54C-130F.  KEEP AWAY
    FROM HEAT, DIRECT SUNLIGHT, OPEN FLAMES, OR SPARKS.  DROPPING OF
    CONTAINERS MAY CAUSE BURSTING.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE AND
    ADDITIONAL TOXIC CHEMICALS MAY BE FORMED IN SMALL AMOUNTS.

===================  Toxicological Information	===================

Toxicological Information:NONE SPECIFIED BY MANUFACTURER.

=====================  Ecological Information  =====================

Ecological:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT PUNCTURE OR INCINERATE CONTAINERS. WHEN
    CONTENTS ARE DEPLETED CONTINUE TO DEPRESS BUTTON UNTIL ALL GAS
    EXPELLED.  DISPOSE OF CONTAINER IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS.

===================  MSDS Transport Information  ===================

Transport Information:US DOT: CONSUMER COMMODITY. ORM-D.

=====================  Regulatory Information  =====================

SARA Title III Information:NONE SPECIFIED BY MANUFACTURER.
Federal Regulatory Information:INGREDIENTS OF THIS PRODUCT ARE LISTED
    ON THE EPA/TSCA INVENTORY OF CHEMICQAL SUBSTANCES.
State Regulatory Information:NONE SPECIFIED BY MANUFACTURER.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.